Pipe Fencing in Central Kansas
Welded steel pipe fence built for cattle, corrals, and hard-working ranches around Haven, Hutchinson, and Reno County, KS. Free estimates and a 5-year workmanship warranty on every weld.
Steel That Holds the Toughest Stock
When a thousand-pound bull leans on it, a pipe fence doesn't flinch. River Creek Fence welds heavy steel pipe into corrals, working pens, and pasture lines that cattle can't push through, bend, or rub loose. Ranchers from Haven out to the pastures north of Hutchinson and across Reno County call us when they're done patching wire and want a barrier that simply stays put.
Owner Cody Yoder grew up working livestock, so he builds these fences the way a cattleman wants them — posts set deep, top rails run dead-level, and joints welded solid instead of clamped. There's no top wire for a horse to catch a leg on and nothing for a heifer to crawl under. It's the kind of fence you build once and quit thinking about.
We handle everything from a single round pen and a set of sorting alleys to long continuous-fence runs along a section line. You get steel sized for the job, clean welds ground smooth, and one straight answer on price — no surprises after the dirt is moved.
Is a Welded Pipe Fence the Right Call for Your Place?
Great for
- Stands up to cattle, bulls, and horses that flatten wire and crack wood
- Welded joints and steel posts mean almost zero maintenance for decades
- No barbs or top wire, so livestock face fewer cuts and snagged legs
- Holds its line through Kansas wind, drought heave, and freeze-thaw ground
- Builds tight, safe corners, alleys, and round pens for working stock
Things to know
- Costs more up front than barbed wire or woven-wire pasture fence
- Heavy pipe and welding gear make it a job for an experienced crew
- Bare steel needs a coat of paint over the years to hold off rust
- Best for corrals and high-traffic runs — long perimeters get pricey fast
Welded for Kansas Wind, Ground, and Hard Use
Central Kansas ground works against a fence — it bakes hard in August, soaks and heaves through winter, and the wind never quits. We set pipe posts in concrete below the frost line and brace every corner and gate so the run stays plumb when a 50-mph gust hits it broadside. Continuous top rails tie the whole line into one rigid structure instead of a string of loose posts.
Every joint is welded, ground clean, and primed so rust can't creep in at the seams. Cody sizes the pipe to the pressure it'll see — heavier wall for crowding pens and sorting alleys, lighter for a quiet pasture divider — so you're not paying for steel you don't need or trusting thin pipe where the herd pushes hardest.
What Ranchers Use Pipe Fencing For
From a crowding pen to a section-line run, here's where welded steel pipe earns its keep across Central Kansas.
Cattle Corrals & Pens
Solid welded pipe holds crowding pens, sorting alleys, and working facilities that cattle can't bend or break.
Livestock Containment
A safe, high barrier for mixed stock that keeps animals in and predators out without barbs or loose wire.
Whole-Ranch Fencing
Tie corrals, lots, and lanes together with steel built to outlast wood and wire across the operation.
Continuous Fence Runs
Long, rigid continuous-fence lines for pastures and section lines that go up fast and stand for decades.
Horse Pens & Arenas
Smooth pipe with no top wire makes a safe round pen, arena, or paddock that's easy on legs and hides.
Ranch Entry Gates
Heavy welded entrance gates and corner posts that set the tone at the head of your drive.
Most Central Kansas pipe fence falls in this range depending on pipe size and how many rails you run. Heavy corral and crowding-pen builds, gates, and rocky digging push toward the high end.
What Affects Your Pipe Fence Installation Price
- Pipe diameter and wall thickness
- Number of rails — 3, 4, or more
- Corner, gate, and brace count
- Soil, rock, and total length of the run
Ranges are general estimates for Central Kansas and are not a quote — your written on-site estimate is always free.
How We Build Your Pipe Fence
Free On-Site Estimate & Layout
We walk the pens or pasture line with you, settle on pipe size and rail count, stake the layout, and call in the Kansas 811 utility locate before any auger turns.
Set Posts Below the Frost Line
Steel posts go deep and set in concrete so the line holds plumb through drought heave, freeze-thaw, and the constant Kansas wind.
Weld Rails & Brace Corners
We run continuous rails dead-level, weld every joint solid, then ground and brace corners and gates so the fence works as one rigid structure.
Grind, Prime & Final Walkthrough
We grind welds clean, prime the bare steel against rust, haul off the scrap, and walk the finished fence with you — backed by our 5-year workmanship warranty.
Pipe Fence Installation FAQ
A properly built pipe fence will stand 30 to 50 years out here, often longer. Steel doesn't rot, split, or pull staples like wood and wire do, so once the posts are set and the joints are welded solid, about all it asks for is an occasional coat of paint to keep rust off.
For pastures, wire is hard to beat on price. But for corrals, crowding pens, sorting alleys, and anywhere cattle lean and push, pipe pays for itself — it doesn't sag, snap, or need constant patching. A lot of our customers wire the open pasture and run pipe where the stock works.
It depends on the pressure the fence will see. Cody sizes heavier-wall pipe for crowding pens and working facilities where the herd really leans, and lighter pipe for quieter pasture dividers and continuous runs. We'll spec it on-site so you get the right steel without overpaying.
Most installed pipe fence runs about $14–$30 per linear foot here, depending on pipe diameter, how many rails you run, and the number of gates and braces. Heavy corral work and rocky digging land at the top of that range. A free on-site estimate is the only way to get a real number.
Not for a long time, and not if it's finished right. We grind every weld clean and prime the bare steel so rust can't get a foothold at the seams. A fresh coat of paint every several years keeps it solid for decades — far less upkeep than restretching wire or replacing rotted posts.
Absolutely. We build round pens, sorting alleys, crowding tubs, and full working facilities along with straight pasture and corral runs. Cody works the layout so gates land where you actually sort and load, and every corner is braced to take the pressure of moving cattle.
Related services & resources
Ready for Fence That Holds the Herd?
Get a free, no-pressure estimate on welded steel pipe fence built for Central Kansas cattle and weather. Call Cody today.
Request Your Free Estimate
Fill out the form below and we'll get back to you within one business day.
Contact Details
Prefer to reach out directly? We're here to help.
Phone
(620) 899-5595
codeyoder@icloud.com
Address
Haven, KS 67543
Hours
Open Daily · 8 AM – 6 PM
Service Areas
Haven, Hutchinson, South Hutchinson, Buhler, Nickerson, Yoder, Pretty Prairie, Partridge, Arlington, Plevna, Mount Hope, Burrton, Halstead, Newton, Kingman, Sterling, Lyons, McPherson, Maize, Wichita, Pratt, Stafford